Hot Water Taps    In Sink Erator (ISE) Steaming Hot Water Taps     Replacement ISE (In Sink Erator) Water Filter (Pair) F-701R

ISE (In Sink Erator) Replacement Water Filter (Pair) F-701R
.
 


£91.20  Inc.  VAT

Product Details

Replacement Water Filters - Pack of 2

Designed for use exclusively with the InSinkErator Steaming Hot Water Tap system, the filters remove or significantly reduce levels of chlorine and other soluble impurities which are found in tap water and can affect its taste. The filters also reduce scale and remove solid particles.

Features and Benefits:

* Cleaner, healthier water
* Improves taste and aroma of beverages
* Removes impurities and temporary hardness
* Quick change cartridge with automatic shut off
* Optional extra filtration

F-701R will come standard with all 1100 series systems. It is a chlorine, taste and odour filter with additional lead protection and a scale reduction capability. It filters sediment at a 5 micron level.

For use with ISE HC1100 and GN1100

EAN - 050375008569

Sold in Pack of 2 

.
Untitled Document

Replace filter cartridge when there is an obvious decrease in water flow to the tap or if there is an objectionable taste or odour to the water.

When the inlet and outlet ports have been closed and the filter’s internal pressure has been relieved, water (about 60ml) will discharge from vent line.

If the new filter cartridge can not be inserted, insert the old one and turn until it stops, remove it and then retry the new cartridge.

It is recommended that carbon filters be replaced within 6 months.

FILTER GUIDE AND REPLACEMENT

Filter replacement instructions:

■ Replace with an InSinkErator® filter.

■ Place pan or dish towel under the filter to catch water drainage during change.

■ Slowly turn the cartridge counter-clockwise completely until it stops (1/4 turn).

■ Pull cartridge straight down and discard.

■ Insert new cartridge into filter head.

■ Top surface of cartridge will become flush with the bottom of the filter head when fully engaged.

■ Turn the cartridge clockwise until it stops (1/4 turn).

■ Align the in/out arrow on the head and bracket assembly to the in/out arrow on the cartridge.

■ Open tap to expel trapped air.

■ Run water for 3 minutes before usage.


Note water automatically shuts off when filter is removed